GYM-TECH.com
- Sports hall & school gymnasium installations
- Sports, PE & gymnastics equipment
- Sports floor refurbishment
- Sports trampolines & rebound therapy
|
|
|
|
|
|
|
|
|
|
|
|
Sports floor refurbishment
Gym-Tech specialise in the repair, refurbishment & sand and seal of wood or polyurethane sports floors.
All sports floors should be regularly & correctly cleaned, and should also be maintained to give optimum performance
and prolong their life span.
See
below for more information about our services & products, or contact
us for further details or a quotation
|
|
|
|
 
Sanding the floor Sealing the floor
Refurbished floor
|
Wooden Sports Floor Refurbishment & Repair
We can sand a wood floor to remove worn or discoloured layers of seal,
then re-seal the floor to restore protection & grip.
Depending on the floors condition it may require one, two or three layers of
seal removing, or if badly worn or discoloured it may require sanding
back to bare wood.
After sanding, the appropriate layers of new seal are applied, with any court
markings required laid before adding the final coat of seal.
We use specialist sanding machines, sanding belts & sport-specific seals
to achieve the correct, high quality finish required for a sports floor.
While sanding the floor we can also carry out any repairs required to the
wood, either by re-fitting loose boards or replacing damaged boards.
Contact us for further information or a quotation:
Tel: 01295 760907 | Fax: 01295 768092 | e-mail: sales@gym-tech.com
|
|
|
|
|
|
 
Sealing the floor Polyurethane floor
|
Polyurethane Sports Floor Refurbishment & Repair
Polyurethane (PU) floors can be refurbished by removing the top layer and
re-coating with a new PU layer.
The floor can also be repaired by cutting out any damaged sections &
replacing them with a new PU section.
Contact us for further information or a quotation:
Tel: 01295 760907 | Fax: 01295 768092 | e-mail: sales@gym-tech.com
|
|
|
|
|
|
|
|
Court Marking
We apply painted court markings for any sport on wood & polyurethane
sports floors.
Court markings are applied to wood floors by sanding the top layer of seal,
removing any existing markings, then applying the new court markings. A new
layer of seal is then applied on top of the new markings for added protection.
Court markings are applied to polyurethane by cleaning the surface, removing
any existing markings, then applying new court markings. A different type of
paint is used for PU floors as there is no seal applied on top.
We use specialist sports paints to achieve the best results in terms of
appearance & longevity.
Guidelines advise the correct design, dimensions & colour to use for each
sport for official competition use, although these can be altered to suit the
individual sports hall if not being used for competitions.
Contact us for further information or a quotation:
Tel: 01295 760907 | Fax: 01295 768092 | e-mail: sales@gym-tech.com
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
